TEX YEAR

Conductive Carbon Ink CC-01

Surface resistance: 15Ω/□. High-performance screen-printable carbon paste with excellent flexibility and adhesion.

Specifically for blood glucose test strips.

Conductive Inks for Blood Glucose Test Strips

Conductive Silver Ink CS-01

Surface resistance: 35mΩ/□. Low-impedance screen-printable silver paste with excellent flexibility and adhesion.

Specifically for blood glucose test strips.

Conductive Inks for Blood Glucose Test Strips

UV-Cured Insulating Ink 1596G

Green, screen-printable UV-cured insulating ink with excellent flexibility, adhesion, and dielectric properties.

Specifically for blood glucose test strips.

Blood Glucose Test Strip Insulating Ink

UV-Cured Insulating Ink 1596B

Blue, screen-printable UV-cured insulating ink with excellent flexibility, adhesion, and dielectric properties.

Specifically for blood glucose test strips.

Blood Glucose Test Strip Insulating Ink

Heat-Cured Insulating Ink 1671

Green, screen-printable heat-cured insulating ink with excellent flexibility, adhesion, and dielectric properties. Specifically developed for blood glucose test strips.

Specifically for blood glucose test strips.

Blood Glucose Test Strip Insulating Ink

Conductive Carbon Ink CC-02

Surface resistance: 19Ω/□. Economical high-performance screen-printable carbon paste with excellent flexibility and adhesion.

Specifically for blood glucose test strips.

Conductive Inks for Blood Glucose Test Strips

Halogen-free and benzene-free synthetic resin
TEX-1665

Appearance：yellow transparent liquid
Viscosity：3,500~5,500cps
Curing method：solvent type, initial drying in 5~10min.

Speaker elastic wave - basin frame connected
Bonding of natural rubber, synthetic rubber and metal, plastic and plywood, leather, cloth, paper, concrete, etc.

Horn center glue
Speaker damper glue
Speaker dust cap adhesive

Neoprene
TEX-1600WB

Appearance：black liquid
Viscosity：2,5000~35,000cps
Curing method：solvent type, initial drying in 10~20min.

Loudspeaker assembly, such as bonding of drum paper, iron basin, voice coil, elastic wave, etc.
Metal to rubber bonding of automobiles, vehicles and ships.
Bonding of metal, stone, wood, rubber, plastic, leather, glass, etc.

Neoprene
TEX-1600H

Appearance：yellowish brown liquid
Viscosity：2,5000~35,000cps
Curing method：solvent type, initial drying in 10~20min.

Loudspeaker assembly, such as bonding of drum paper, iron basin, voice coil, elastic wave, etc.
Metal to rubber bonding of automobiles, vehicles and ships
Bonding of metal, stone, wood, rubber, plastic, leather, glass, etc

Speaker damper glue

Splayed glue neoprene
TEX-666

Appearance：black liquid
Viscosity：8000~12000cps
Curing method：solvent type, initial drying in 10~20min.

Fixation of speaker sideline

Voice coil adhesive

Water-based glue for foam edge
TEX-107W

Appearance：white liquid
Viscosity：10,000~20,000cps
Curing method：water-based adhesive, initial drying in 1 hr.

It is used for connecting speaker foam edge, cloth edge and basin frame.
Used for bonding metal, foam, cardboard and other materials.

Vibrating edge / Basin frame adhesive

Black water-based glue
TEX-242

Appearance：black liquid
Viscosity：12,000~15,000cps
Curing method：water-based adhesive, initial drying in 1 hr.

Used for fixing speaker voice coil wire.
It is used to bond the rubber edge, foam edge and TPU edge of loudspeaker to the basin frame.
Bonding of stainless steel, aluminum, coated metal, PP, PE and other materials.

Vibrating edge / Basin frame adhesive

Long opening time PUR
R3150

Appearance：black block
Viscosity：4,000~6,000cps（110℃）
Curing method：moisture curing hot melt adhesive, opening time 10-11min.

Assembly of 3C products.
Bonding of metal, plastic, glass and other materials.

Laptops / Desktop display / Vehicle mounted

Re-workable PUR R3042

Appearance: black block
Viscosity: 1,500 ~ 3,500 cps (120℃)
Curing method: moisture curing hot melt adhesive, opening time 2~4 minutes
Low bubble, easy to rework

Assembly of 3C products.
Electronic components are fixed.
Bonding of metal, plastic, glass and other materials。

Laptops / Desktop display / Vehicle mounted
TVs / Large size displays

Low viscosity PUR
R3125

Appearance：black block
Viscosity：2,000~3,000cps（110℃）
Curing method：moisture curing hot melt adhesive, opening time 3~5min.

Assembly of 3C products.
Used for fixing electronic components.
Bonding of metal, plastic, glass and other materials.

Laptops / Desktop display / Vehicle mounted

Underfills 51301

Fast curing at high temperatures, Re-workable characteristics.

Applicability to various bottom-filling applications, including BGA, FC, CSP, and more

PCBA stands for Printed Circuit Board Assembly

UV glue 1539 series
for glass

Appearance：colorless transparent liquid
Viscosity：1,200 cps
Curing method：UV curing

It has the advantages of low odor, high transparency, high bonding strength to glass and other materials, high temperature and humidity resistance, and low hardening power.
Suitable for: assembly industry and furniture industry.

Industrial Controls Electronics

UV glue 1585 series
for plastics

Appearance：colorless transparent liquid
Viscosity：3,800 cps
Curing method：UV curing

It has the advantages of low hardening energy, rapid hardening and good hardening depth. It has high bonding strength, high elongation, high temperature and high humidity resistance for glass, metal, PC, PMMA, PVC, ABS and some plastic materials. It is mainly used for bonding plastics and dissimilar materials.
Suitable industries：assembly industry, toy industry, household appliance industry, etc.

UV glue 1582 series
for metals

Appearance：colorless transparent liquid
Viscosity：2,500 cps
Curing method：UV curing

It has the advantages of rapid hardening, good hardening depth, high hardness, good toughness and high temperature and humidity resistance, with high adhesion strength to glass, stainless steel, nickel, zinc, aluminum and some metals, and is mainly used for bonding glass or metal materials.
Suitable for：assembly industry and bolts industry.

UV glue 1586 series
for lens module

Appearance：white liquid
Viscosity：8,500 cps
Curing method：UV curing

It has the advantages of low hardening energy, good hardening depth, high bonding strength, high temperature and humidity resistance for PC, PMMA, PVC, ABS and some plastic materials. It is suitable to be used for plastic bonding, substrate circuit protection and lens module assembly.
Suitable for：optical film assembly, component fixation, electronic assembly.

Automotive Electronics
Industrial Controls Electronics

UV moisture curing adhesive
BK-3C28

Good initial strength, UV pre-curing, effective control of dispensing size, low VOC

Assembly of narrow bezel panels, assembly of electronic products.

Laptops / Desktop display / Vehicle mounted
TVs / Large size displays

UV Thermal Curable adhesives
M202A

Low shrinkage, low expansion coefficient, excellent moisture resistance.

CMOS camera module assembly

Automotive Electronics

UV H.C. 1551 series
for PET film

Appearance：colorless transparent liquid
Viscosity：3,80 cps
Curing method：UV curing

It has the advantages of good adhesion and weather resistance, short hardening time and good protection for the substrate, with good adhesion strength to PET, PC and other film materials, and can adjust the physical properties such as refractive index and hardness, which can be used for UV molding of microstructures.
Suitable for：optical film material, hardening film material, appearance hardening.

UV H.C. 1552 series
for PET film

Appearance：colorless transparent liquid
Viscosity：1,500 cps
Curing method：UV curing

Meet TVOC requirements, good adhesion to PVC, stable viscosity during roller coating, no need to adjust, convenient operation, high hardness, good abrasion resistance, good matt maintenance, good scratch resistance test after coating, and no scratches on the floor surface.
Suitable for industries：PVC flooring, PVC veneer.

1581 series of UV filler
for carbon fiber composite

Appearance: colorless transparent liquid
Viscosity：40cps (spray)/30.000cps (paste)
Curing method：UV curing

It has the advantages of low hardening energy, rapid hardening, good hardening depth, high hardness, easy grinding, high temperature and high humidity resistance, etc, with high adhesion strength to carbon fiber composites and is mainly used for caulking and reinforcement of materials. This series has low viscosity for spraying and high viscosity for scraping.
Suitable industries：composite products, bicycles, helmets, rackets and other industries.

Carbon Fiber Bicycle

UV curable side sealing adhesive
1573 series

Appearance：black liquid
Viscosity：4,500cps
Curing method：UV curing

Black adhesive material, cured at appropriate ultraviolet wavelength, is resistant to glass with high bonding strength, high temperature, high humidity and other harsh environments. It is mainly used for shielding and buffering the light leakage on the side of the panel.
Suitable for：panel industry, glass industry, etc.

Laptops / Desktop display / Vehicle mounted
TVs / Large size displays
Industrial control

UV shading buffer adhesive
1576 series

Appearance：black/transparent liquid
Viscosity：4,500cps
Curing method：UV curing

The black adhesive material has good softness after being cured with appropriate UV. It can replace light blocking foam tape to realize automation, and has good rework performance. Mainly used for light source shielding and buffering.
Suitable for：panel industry, whole machine assembly, electronic whiteboard and other industries.

Laptops / Desktop display / Vehicle mounted
TVs / Large size displays
Industrial control

UV curable moisture-proof adhesive
1577 series

Appearance：blue transparent liquid
Viscosity：1,300 cps
Curing method：UV curing

Blue adhesive material has good moisture-proof protection function after UV curing. Solvent free, 100% solid content and low VOCs, with good heavy industry performance. It is mainly used for insulation protection of exposed terminals.
Suitable for：panel industry, PCBA industry, etc.

Laptops / Desktop display / Vehicle mounted
TVs / Large size displays
Industrial control

Universal UV curable pressure sensitive adhesive
1565 series

Appearance：colorless transparent liquid
Viscosity：3,400 cps
Curing method：UV curing

It is a UV curable pressure sensitive adhesive with low viscosity and good fluidity. It is soft and elastic after curing at appropriate UV wavelength. It can replace transparent double-sided adhesive and be used in automatic production lines. It has certain bonding strength to glass, plastic and metal.
Suitable industries：panel industry, backlight module assembly and other industries.

Laptops / Desktop display / Vehicle mounted
TVs / Large size displays
Industrial control

MiniLED Sealing Film KFC series

Uniform color, easy to manufacture, and re-workable.

Applied in Mini LED direct-view, Backlight module packaging

Laptops / Desktop display / Vehicle mounted
TVs / Large size displays
Industrial control
LED and Display

Rotary plasma injection equipment
AJ-800S

0 to 50 mm uniform treatment.
The speed is about 0~70 m/min (different materials, different speeds).
Electrically neutral, uncharged, high safety.

Semiconductor/LCD glass/automotive electronics/mobile phone industry/printing and coating/household appliances/cable.

Laptops / Desktop display / Vehicle mounted
TVs / Large size displays
Industrial control

Direct injection low-temperature and atmospheric plasma equipment
Low temperature and atmospheric pressure plasma equipment with multiple nozzles (array type)

Man-machine interface
Suitable for 3D workpieces with complex structure
It does not change the inherent characteristics of the body, and the modification only occurs on the surface
The whole process is treated by dry method, without pollution
Low temperature treatment, suitable for heat sensitive materials
High stability, long-service life
Low energy consumption, low maintenance cost
Multi-nozzle (array type): large plane workpiece

Semiconductor/LCD glass/automotive electronics/mobile phone industry/printing and coating/household appliances/cable.

Laptops / Desktop display / Vehicle mounted
TVs / Large size displays
Industrial control