BRANDS
TOYOBO Co., Ltd.
The transparent conductive film is developed by the technologies such as polymer synthesis, polymer stretching and dry-wet coating. There are different kinds of conductive films available for TOYOBO ITO film: Clear, Anti-glare, Anti-Newton Rings, amorphous, crystal, etc.
Product Name
Product Specification
Applications
Industry
TOYOBO ITO Conductive Film
500RD
500RD
The impedance value is 500 Ω/sq., which is suitable for resistive touch panel.
It is anti-newton's rings, good writing performance and low shrinkage.
It is anti-newton's rings, good writing performance and low shrinkage.
Applied to resistive touch panel.
Industrial control
TOYOBO ITO Conductive Film
TT186
TT186
The impedance value is 440 Ω/sq., which is suitable for resistive touch panel. It is anti-newton's rings, good writing performance and low shrinkage.
Applied to resistive touch panel.
Industrial control
Protective film
FM-330P-1
FM-330P-1
PP base material, with a thickness of 50um, is used for surface protection of touch panel during manufacturing. The operating temperature can reach 120 ℃, which is easy to tear off without sticking. In addition, the pipe core is made of plastic, which is not easy to produce dust and pollute the working space.
Can be applied to touch panel process protection.
Industrial control
PEN film
Q5100
Q5100
The thickness is 12um~250um. It has good thermal stability, electrical insulation characteristics, resistance to organic chemical solvents and water resistance. The overall physical property is better than that of PET film.
It can be applied to insulation materials of on-board motor, inductive sensor base plate, Speaker elastic wave, etc.
Motor
Automotive Electronics
Automotive Electronics
TOYOBO ITO conductive elargol
DW-440L-29C
DW-440L-29C
Its impedance value is 5.0 × 10-5 Ω· cm, conductive silver ink cured at low temperature in an oven at 120 ℃ * 30min. It is suitable for touch panel circuit printing and has good adhesion to ITO film and ITO Glass.
It can be used for TP touch panels, film keypads, special-shaped keypads and other printed circuit applications.
Industrial control
TOYOBO ITO conductive elargol
DW-520H-19
DW-520H-19
Impedance value is 7×10-5Ω·cm, cured in an oven at 130 ℃ * 30min, with corresponding to the laser processing, L/S 20/20um, good adhesion to ITO film and ITO Glass.
It can be used for TP touch panels, film keypads, special-shaped keypads and other printed circuit applications.
Industrial control
TOYOBO ITO conductive elargol
DF-3619
DF-3619
With an impedance value of 1.6 x 10-4Ω-cm, this stretchable conductive silver ink has the ability to stretch during the thermoforming process to match the deformation of the substrate without cracking, and can effectively control the change in impedance value to form 3D or curved electrode and circuit patterns. Good adhesion to PC FILM and PET FILM.
Apply to curved touch keys.
Industrial control
TOYOBO conductive carbon adhesive
DY-280H-3
DY-280H-3
Impedance value is 8.0 × 10-2 Ω· cm, cured in an oven at 150 ℃ * 30min, with good adhesion to PET and conductive silver ink.
Can be applied to membrane and connector lines.
Industrial control
TOYOBO anti-corrosion adhesive
UV curing, alkali liquor can be used to remove glue after the process.
It can be used for TP touch panels, film keypads, special-shaped keys and other printed circuit applications.
Industrial control
TOYOBO insulating ink
FR-200C-4
FR-200C-4
Impedance value>1.0 × 1013 Ω· cm, UV curing, good adhesion with conductive ink.
It can be used for TP touch panels, film keypads, special-shaped keys and other printed circuit applications.
Industrial control
Top