UV curable side sealing adhesive
1573 series
Appearance：black liquid
Viscosity：4,500cps
Curing method：UV curing
Black adhesive material, cured at appropriate ultraviolet wavelength, is resistant to glass with high bonding strength, high temperature, high humidity and other harsh environments. It is mainly used for shielding and buffering the light leakage on the side of the panel.
Suitable for：panel industry, glass industry, etc.
UV shading buffer adhesive
1576 series
Appearance：black/transparent liquid
Viscosity：4,500cps
Curing method：UV curing
The black adhesive material has good softness after being cured with appropriate UV. It can replace light blocking foam tape to realize automation, and has good rework performance. Mainly used for light source shielding and buffering.
Suitable for：panel industry, whole machine assembly, electronic whiteboard and other industries.
UV curable moisture-proof adhesive
1577 series
Appearance：blue transparent liquid
Viscosity：1,300 cps
Curing method：UV curing
Blue adhesive material has good moisture-proof protection function after UV curing. Solvent free, 100% solid content and low VOCs, with good heavy industry performance. It is mainly used for insulation protection of exposed terminals.
Suitable for：panel industry, PCBA industry, etc.
Universal UV curable pressure sensitive adhesive
1565 series
Appearance：colorless transparent liquid
Viscosity：3,400 cps
Curing method：UV curing
It is a UV curable pressure sensitive adhesive with low viscosity and good fluidity. It is soft and elastic after curing at appropriate UV wavelength. It can replace transparent double-sided adhesive and be used in automatic production lines. It has certain bonding strength to glass, plastic and metal.
Suitable industries：panel industry, backlight module assembly and other industries.
Urethane Conformal Coatings
Most Popular : 1A27
1A27LTX, 1A33
1A33LTX, 1A33LOS
Polyurethane coatings are available in either single or two-component formulations. Both options provide excellent humidity resistance and far greater chemical resistance than acrylic coatings. Single component polyurethanes, while easy-to-apply and enjoy long pot life,
Removing a polyurethane coating can be difficult due to its a very high resistance to solvents. For single-component urethanes, the preferred method of removal is by using a burn through (solder iron or other) technique. Specially formulated strippers could also to completely remove the coating from an entire PCB assembly for more wide-ranging rework. These products do not necessarily represent our complete urethane range.
UV Curable Conformal Coatings(Type AR/UR)
Most Popular : UV40
UV40-250, UV40 LED
UV50LV, UV500
HumiSeal’s UV curable conformal coatings represent an exciting innovation that provides superior performance. When combined with extremely fast curing, allows for short cycle times and maximum production speeds. These products can be sprayed using traditional automated spray equipment with the relatively simple addition of a small-footprint UV light curing unit.
HumiSeal has developed a range of UV curable coatings that are unique within the industry which include:
-100% solids, with minimal environmental impact
- Superb adhesion to a wide range of commonly used solder resists
- High IR (insulation resistance) and MIR (moisture insulation resistance)
- Resistance to a wide range of solvents
- Great flexibility at a wide range of temperatures
- Secondary moisture cure mechanism for shadowed areas
Silicone Conformal Coatings
Most Popular : 1C49, 1C51
1C55
HumiSeal® 1C55 conformal coating is:
silicone based, fluoresces under UV light, thermal cure, single component, high solids, no VOCs or solvent, low toxicity, excellent environmental resistance and moisture resistance.
Silicone conformal coatings are most widely used in high-temperature environments due to their innate ability to withstand prolonged exposure to higher temperatures than most other conformal coating chemistries. This attribute has made them the primary choice for under hood automotive applications. They are also capable of being applied in thicker films making them useful as a vibration dampening/isolation tool if the coated assembly is to be placed in a high vibration environment.
TOYOBO ITO Conductive Film
500RD
The impedance value is 500 Ω/sq., which is suitable for resistive touch panel.
It is anti-newton's rings, good writing performance and low shrinkage.
Applied to resistive touch panel.
TOYOBO ITO Conductive Film
TT186
The impedance value is 440 Ω/sq., which is suitable for resistive touch panel. It is anti-newton's rings, good writing performance and low shrinkage.
Applied to resistive touch panel.
Protective film
FM-330P-1
PP base material, with a thickness of 50um, is used for surface protection of touch panel during manufacturing. The operating temperature can reach 120 ℃, which is easy to tear off without sticking. In addition, the pipe core is made of plastic, which is not easy to produce dust and pollute the working space.
Can be applied to touch panel process protection.
TOYOBO ITO conductive elargol
DW-440L-29C
Its impedance value is 5.0 × 10-5 Ω· cm, conductive silver ink cured at low temperature in an oven at 120 ℃ * 30min. It is suitable for touch panel circuit printing and has good adhesion to ITO film and ITO Glass.
It can be used for TP touch panels, film keypads, special-shaped keypads and other printed circuit applications.
TOYOBO ITO conductive elargol
DW-520H-19
Impedance value is 7×10-5Ω·cm, cured in an oven at 130 ℃ * 30min, with corresponding to the laser processing, L/S 20/20um, good adhesion to ITO film and ITO Glass.
It can be used for TP touch panels, film keypads, special-shaped keypads and other printed circuit applications.
TOYOBO ITO conductive elargol
DF-3619
With an impedance value of 1.6 x 10-4Ω-cm, this stretchable conductive silver ink has the ability to stretch during the thermoforming process to match the deformation of the substrate without cracking, and can effectively control the change in impedance value to form 3D or curved electrode and circuit patterns. Good adhesion to PC FILM and PET FILM.
Apply to curved touch keys.
TOYOBO conductive carbon adhesive
DY-280H-3
Impedance value is 8.0 × 10-2 Ω· cm, cured in an oven at 150 ℃ * 30min, with good adhesion to PET and conductive silver ink.
Can be applied to membrane and connector lines.
TOYOBO anti-corrosion adhesive
UV curing, alkali liquor can be used to remove glue after the process.
It can be used for TP touch panels, film keypads, special-shaped keys and other printed circuit applications.
TOYOBO insulating ink
FR-200C-4
Impedance value>1.0 × 1013 Ω· cm, UV curing, good adhesion with conductive ink.
It can be used for TP touch panels, film keypads, special-shaped keys and other printed circuit applications.
MiniLED Sealing Film KFC series
Uniform color, easy to manufacture, and re-workable.
Applied in Mini LED direct-view, Backlight module packaging
Rotary plasma injection equipment
AJ-800S
0 to 50 mm uniform treatment.
The speed is about 0~70 m/min (different materials, different speeds).
Electrically neutral, uncharged, high safety.
Semiconductor/LCD glass/automotive electronics/mobile phone industry/printing and coating/household appliances/cable.
Vacuum low-voltage plasma equipment
• Brain-computer interface
• Suitable for 3D workpieces with complex structures
• Does not change the inherent characteristics of the body, modification only occurs on the surface
• The whole process of dry treatment, no pollution
• Low temperature processing, suitable for heat-sensitive materials
• High stability and long service life
• Low energy consumption, low maintenance costs
Semiconductor/LCD glass/automotive electronics/mobile phone industry/printing and coating/household appliances/cable
Direct injection low-temperature and atmospheric plasma equipment
Low temperature and atmospheric pressure plasma equipment with multiple nozzles (array type)
Man-machine interface
Suitable for 3D workpieces with complex structure
It does not change the inherent characteristics of the body, and the modification only occurs on the surface
The whole process is treated by dry method, without pollution
Low temperature treatment, suitable for heat sensitive materials
High stability, long-service life
Low energy consumption, low maintenance cost
Multi-nozzle (array type): large plane workpiece
Semiconductor/LCD glass/automotive electronics/mobile phone industry/printing and coating/household appliances/cable.
