HumiSeal®Thinner_HumiSeal® Conformal Coating_Products | 2-Part Acrylic Adhesive, Structural Acrylics, UV Resin, Cyanoacrylate manufacturer│TEX YEAR Since 1976

Close
Search
banner banner

PRODUCTS

HumiSeal®Thinner

HumiSeal®Thinner

HumiSeal Thinners are specifically formulated to be used in conjunction with different coating chemistries. To determine the best product for your application please refer to the Technical Datasheet for your specific coating. The appropriate Thinner is identified on the datasheet.

 

Once the correct Thinner has been identified return to this page to obtain the Technical Datasheet (TDS) and Safety Datasheet (SDS) for the Thinner.
 

Product Name
Product Specification
Applications
Industry
HumiSeal® Thinners 73

HumiSeal T73
Thinner 73 is:
Compatible with HumiSeal 1B73
RoHS directive 2015/863/EU
Add HumiSeal® Thinner to a compatible coating until the desired viscosity is obtained.
PCBA stands for Printed Circuit Board Assembly
HumiSeal® Thinners 789

HumiSeal T789
HumiSeal® Thinner 789 has been especially developed as a diluent for solvent based conformal coating products.
It is suitable for use with certain Acrylic, Polyurethane and Synthetic Rubber products Compatible with China GB30981-2020.
PCBA stands for Printed Circuit Board Assembly
HumiSeal® Thinners 521

HumiSeal T521
When necessary, the viscosity of HumiSeal® coatings may be adjusted for application purposes. HumiSeal® Thinner.
521 is specially formulated to maintain the original system balance when added to the correct coating type.
Add HumiSeal® Thinner to a compatible coating until the desired viscosity is obtained.
PCBA stands for Printed Circuit Board Assembly
HumiSeal® Thinners 600 or 604

HumiSeal T600
or HumiSeal T604
When necessary, the viscosity of HumiSeal® coatings may be adjusted for application purposes, using a compatible thinner from the table below.
HumiSeal® Thinners are blends of solvents formulated to maintain and preserve the original system benefits.
Add HumiSeal® Thinner to a compatible coating until the desired viscosity is obtained.
PCBA stands for Printed Circuit Board Assembly
Top